Skip to content

Watch Winder TPD Parameters

How to Wind A.LANGE SOEHNE Watch?

by SheldonLong 16 Nov 2022 0 Comments

How to Wind A.LANGE SOEHNE Watch?

 

About  A. Lange & Söhne
A.Lange & Söhne Watch winding steps
Recommended  watch winder
In Conclusion

About A. Lange & Söhne

Lange & Söhne is a highly regarded watch manufacturer. Lange watches have a distinct Glashütte style in appearance and design, which is closer to the classic British style, different from the Swiss style. An emblematic watch: a classic, a classic that is understated yet unique, embodying the Lange brand. A. Lange & Söhne manufactures only watches with mechanical movements, focusing all resources on developing the perfect and precise timing mechanism. For those who value mechanical performance above all else, an A. Lange & Söhne watch is a perfect choice.

Why manually wind an A. Lange & Söhne watch?

a manual A. Lange & Söhne is when it stops. Different A. Lange & Söhne Watches have different power reserve times. This means that, for example, if you put A. Lange & Söhne Put watch on the table and then don't wear it for a few days and it stops working.

when an A. Lange & Söhne watch stops that you should shake it to bring it back on, however, this is one of the reasons why you should manually wind your Audemars Piguet first because you have the chance to damage its risk. When shaking the watch vigorously, the movement may wear out faster.

If your watch has stopped, it may even shake a little before starting, but by manually winding your A. Lange & Söhne you can easily get it to restart.

A. Lange & Söhne Watch Winding Steps

Winding a watch is a complex job, but for many watch lovers, it's part of the joy of interacting with a watch.

Manual winding: Hold the watch in one hand and firmly unscrew the crown with the other hand until it feels zero, then wind until you feel resistance (be sure to slow down just enough until full, if you have been using it all the way to the beginning The same force and speed, it is easy to damage the winding mechanism when suddenly full.) It is recommended to turn the crown at least 30 turns to keep the moving parts well-lubricated.

A. Lange & Söhne watch winding settings

Most A. Lange & Sohne watch self-winding movements can be properly wound by most watch winders. Typically, A. Lange & Sohne's self-winding movements require 500 revolutions per day, and most of them can be rotated clockwise. So take your time and enjoy choosing a lovely spring that fits you and your watch.

Here are some of the most popular  A. Lange & Söhne models and their winding settings.

MODEL, DESCRIPTION MOVEMENT / CALIBER WINDING DIRECTION TURNS PER DAY (TPD)
1815 Automatik (2004) 921.2 Sax-O-Mat Both 500
Anniversary Langematik L921.7 Sax-O-Mat Both 500
Grand Langematik Sax-O-Mat Both 500
Langematik 921.4 Both 500
Langematik with date L922.1 Sax-O-Mat Both 500
Langematik without date Sax-O-Mat Both 500
Langematik Perpetual L922.1 Sax-O-Mat Both 500

If you cannot find your watch model (or movement) in this watch, you can try to determine your A. LANGE & SOHNE winding mode. You should choose the combined winding mode (CW+CCW) and minimum turns per day (TPD). Then put the watch in the watch winder and check the accuracy of the time displayed by the watch after a few days. If you fall behind, you need to increase the number of TPDs by one level.

A.Lange & Söhne watch time adjustment method

  1. In order to prolong the life of the watch, many watches gradually jump in the time period around midnight, generally, it is normal to complete the jump before 2 am, and some watches complete it before 4 am.
  2. Do not adjust the date between 22:00-2:00 (some watches are at 20:00-4:00), which can easily cause damage to the watch and incorrect calendar jumps.
  3. In the case of jumping the calendar during the day, you can adjust — if you find that the calendar jumps around noon during the day, the time of the watch will generally become faster and slower by 12 hours. For example, if it is actually 11 am now and the watch is 11 pm the day before, just turn the hour hand of the watch once and the afternoon will become morning. This situation is relatively common, with about 50% probability.

Generally, the watch needs to be clockwise in time adjustment, not counterclockwise. Turning the watch counterclockwise is easy to cause deviation in the direction of the watch pointer (the quartz two-pin type should be turned counterclockwise). Please pay special attention. If you wear it with the left hand and adjust it with the right hand, the forward rotation is clockwise.

The design of the watch is different, and the adjustment method is also different, but when adjusting the watch with the calendar function, you need to consider the factors of morning and afternoon.

Can an A. Lange & Söhne watch be wound?

  1. Lange & Söhne watches should not be overwound when manually wound. Today, A. Lange & Söhne designs watches that won’t overwind no matter how you wind them. Once the maximum air volume is reached, the winder simply disengages. However, keep in mind that this is not always the case. This means that Audemars Piguet watches that do not have this technical ability may overwind the chain. If you do this, you will cause the spring to break and need to be replaced.
  2. Lange & Söhne creates sophisticated mechanical watches with complex functions and slightly different adjustment methods for different styles of watches. The difference is, it is better to refer to the instruction manual of the corresponding watch so as not to damage your beloved watch.

MOZSLY offers some specialized watch winders for A. Lange & Söhne watches, below you will find some of our best sellers.

What kind of watch winder is suitable for A. Lange & Söhne?

There is no doubt that a high-end watch needs a fancy watch winder. Here are 2 of the highly rated watch winders that we recommend.


MOZSLY® Double Watch Winder -Orange Leather 

  • Material: wooden box/leather pillow/acrylic board
  • Color: Orange/Black/Brown/Carbon Fiber
  • Size: 8.8*5.9*4.7 inches
  • 4 modes with TPD settings ranging from 650 to 1500
  • All three winding directions are supported
  • Antimagnetization
  • Use Japanese upgraded Mabuchi motor
  • Dual power
  • 3 Years Warranty
  • This watch features a unique orange winding with a multi-layer paint process for a more beautiful, shiny and smooth finish. Inside, the leather and wood grain look sleek and luxurious. looks great.

 

MOZSLY® Single Watch Winder - Black Leather

 

  • Material: wooden box/PU pillow/acrylic board
  • Colour: Black
  • Dimensions: 4.4 x 6 x 4.4 inches
  • 4 modes with TPD settings ranging from 650 to 1500
  • All three winding directions are supported
  • Antimagnetization
  • Use Japanese upgraded Mabuchi motor
  • Dual power
  • 3 years warranty

This watch winder is as simple and understated as Audemars Piguet's other classic black watches. If you're a watch collector who wants your watch to look elegant and unobtrusive, this black watch winder is perfect for you. This will help improve the look of your expensive watch without being overly ostentatious.

MOZSLY watch winders use high-quality upgraded Japanese Mabuchi motors, a well-known brand that manufactures precision motors. These motors keep the noise below 10 decibels, so even if you put it in your bedroom, it will give you a very quiet experience. The internal motor is closed and can be separated from the watch so that the watch will not be magnetized and affect the travel time. With a 36-month warranty and friendly customer service, we welcome you to purchase our watch winders.

In conclusion

Storing a mechanical watch in a watch winder to wind it keeps the watch's mechanical gears lubricated, extending the life of the watch and keeping it working properly.

Prev Post
Next Post

Leave a comment

Please note, comments need to be approved before they are published.

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Recently Viewed

Close
Edit Option
Close
Back In Stock Notification
this is just a warning
Login Close
Close
Shopping Cart
0 items