Skip to content

Watch Winder TPD Parameters

How to Wind an ALAIN SILBERSTEIN Watch?

by SheldonLong 08 Dec 2022 0 Comments

How to Wind an ALAIN SILBERSTEIN Watch?

 

About Alain Silberstein 
Alain Silberstein watch winder steps
Recommended watch winder
In Conclusion

About Alain Silberstein 

Alain Silberstein Founded in 1990 in Besançon, the brand by Alain Silberstein and Sylvie. The company specializes in watches with modern luxury designs. Alan Silberstein, an architect and interior designer himself, immediately received great acclaim for his outstanding and bold designs.

Silberstein's timepieces are known for their signature use of the three basic colors (red, blue, and yellow); Silberstein was the first designer to create a sapphire crystal case and is also known for making fun high-end timepieces in limited colors and unconventional materials pioneers. In addition, he often uses different materials and different treatments in an extremely delicate combination.

As can be seen from their collections, his French flair brought a little fun to the Swiss watchmaking world. Sadly, the Silberstein Company is now defunct, making the pieces we have even rarer and more collectible.

Why Manual Winding for Alain Silberstein Watches?

To wind an Alain Silberstein watch. The most common reason is that you can accurately adjust it to time. This saves you from having to reset your watch as often. It also means that the watch will always be accurate and reliable.

Alain Silberstein Watch Manual Winding Steps

- Locate the crown which is usually on the right side of the dial.
- Gently pull the crown away from the dial to its original position, being careful not to pull it too far.
- Begin winding the crown clockwise until resistance is felt, or 40 revolutions at a time.
- Push the crown back into its normal position.
- Pull the crown out again and turn the crown to set hands until the hands show the current time and date.
- Push it back again when done.

For manual winding, the process is simple and you will find that winding your Alain Silberstein gives you a few minutes of peace every day!

Alain Silberstein Watch Winder Settings

Most Alain Silberstein watch automatic movements can be wound properly with most watch winding boxes. Generally, Alain Silberstein self-winding movement needs to rotate 650-800 revolutions per day, and most of them can be wound clockwise. 

MODEL, DESCRIPTION MOVEMENT / CALIBER WINDING DIRECTION TURNS PER DAY (TPD)
Basik Gold Winner ETA 2836-2 Both 650
Basik Hole in One ETA 2836-2 Both 650
Basik Klub ETA 2892-A2 Both 650
Basik Valentine ETA 2836-2 Both 650
Basik Year of the Rat ETA 2836-2 Both 650
Black Basik ETA 2836-2 Both 650
Black Krono Bauhaus ETA 7751 CW 800
Black Marine Krono Valjoux 7751 CW 800
Black Marine Smileday ETA 2836-2 Both 650
Bolidame ETA 2671 Both 650
Bolido Krono Steel, Titanium, Diamonds, Carbonfiber Frederic Piguet 1185 CW 800
Bronze Basik ETA 2836-2 Both 650
Bronze Krono Bauhaus ETA 7751 CW 800
Karavan Moon ETA 2671 / ETA 2678 Both 650
Karavan Valentine ETA 2671 / ETA 2678 Both 650
Klub Enamel ETA 2892-A2 Both 650
Klub GMT (L) (M) (S) ETA 2892-A2 or 2893-2 Both 650
Klub Grafik ETA 2892-A2 Both 650
Klub Klassik Steel (L) (M) (S) ETA 2892-A2 Both 650
Klub Sport Titanium (L) ETA 2892-A2 Both 650
Krono A FP 1185 CW 800
Krono A Titanium FP 1185 CW 800
Krono "B" Steel, Diamonds, Gummy, Titanium, Tricolor, White Lemania 5100 CCW 800
Krono Bauhaus 2 Titanium Valjoux 7751 CW 800
Krono Bauhaus 2 Diamonds, Full Diamond Valjoux 7751 CW 800
Krono Bauhaus 2 Laqué Cloisonné Valjoux 7751 CW 800
Krono Bauhaus 2 Alligator Tricolor   CW 800
Krono Bauhaus 2 Black Storm   CW 800
Krono Bauhaus Bronze   CCW 800
Le Réveil GMT AS 5008 CW 800
Le Réveil Smileday AS 5008 CW 800
Marine 20 ETA 2892 Both 650
Marine Krono Valjoux 7751 CW 800
Milanese ETA 2671 Both 650
Nurse Small ETA 2671 Both 650
Nurse Large ETA 2671 Both 650
Pavé GMT ETA 2893-2 Both 650
Pavé GMT Cuir ETA 2893-2 Both 650
Pavé Jumbo Chronograph Lemania 5100 CCW 800
Pavé Krono FP 1185 CW 800
Pavé Krono Diamond, Full Diamond FP 1185 CW 800
Pave Krono Meadow   CW 800
Pavé Krono Laqué Cloisonné FP 1185 CW 800
Pavé Smileday ETA 2836-2 Both 650
Pikto ETA 2892-A2 Both 650
Pikto Smile Day ETA 2836-2 Both 650
Rondo Dots, Blue Dots, Green Dots ETA 2836-2 Both 650
Rondo GMT ETA 2893-2 Both 650
Rondo Krono FP 1185 CW 800
Rondo Krono Diamonds, Full Diamond FP 1185 CW 800
Rondo Krono Ice Cream   CW 800
Rondo Krono Steel   CW 800
Rondo Krono White Night   CW 800
Rondo Pink Dots   CCW 800
Rondo Smileday ETA 2836-2 Both 650
Roots ETA 2836-2 Both 650

If you could not find your watch model (or caliber) in this table, you may determine your Alain Silberstein. winding mode on a trial basis. You should select the combined winding mode (CW+CCW) and the minimal number of turns per day (TPD). Then place your watch into the gyroscopic watch winder and check after a few days how accurately your watch shows the time. If it runs behind, it is necessary to increase the number of TPD by one step.

Alain Silberstein Watch Time Adjustment Method

Winding a watch is a complex endeavor, but for many watch lovers, it is one of the joys of interacting with a watch.

- Pull the crown outwards with one push
- Set the watch to the exact local time.
- Push in the crown and turn clockwise until secure.
- Push the crown firmly into position 1 and the watch starts to move.

Some Alain Silberstein watches have a screw-down crown that must be unscrewed to change the time or date. After use, the crown must be pressed against the case and tightened. Otherwise, it will affect the water resistance of the watch.

Can I Manually Wind my Automatic Watch With the Crown?

It’s okay to do this once in a while, but not too often—especially if your watch has a screw-down crown.
Firstly, with crown winding, the gears and other parts of an automatic movement will wear out faster, as will the screw-in crown system, as it is not designed for frequent use. Self-winding watches should be worn for at least eight hours a day to make the most of their power reserves, so rather than letting your automatic watch's power reserve drain, invest in a simple automatic watch winder.

What Kind of Watch Winder is Suitable for Alain Silberstein ?

There is no doubt that a high-end watch needs a fancy watch winder. Here are 2 of the highly rated watch winders that we recommend.

MOZSLY® Double Watch Winder -Orange Leather  

double watch winder box-blog

  • Material: wooden box/PU leather/acrylic board
  • Color: Orange/Black/Brown/Carbon Fiber
  • Size: 8.8*5.9*4.7 inches
  • 4 modes with TPD settings ranging from 650 to 1500
  • All three winding directions are supported
  • Antimagnetization
  • Use Japanese upgraded Mabuchi Motor
  • Dual power
  • 3 Years Warranty
  • This watch features a unique orange winding with a multi-layer paint process for a more beautiful, shiny, and smooth finish. Inside, the leather and wood grain look sleek and luxurious. looks great.

MOZSLY® Single Watch Winder - Black Leather

single black watch winder box

  • Material: wooden box/PU leather/acrylic board
  • Colour: Black
  • Dimensions: 4.4 x 6 x 4.4 inches
  • 4 modes with TPD settings ranging from 650 to 1500
  • All three winding directions are supported
  • Antimagnetization
  • Use Japanese upgraded Mabuchi Motor
  • Dual power
  • 3 years warranty

This watch winder is as simple and understated as Alain Silberstein's other classic black watches. If you're a watch collector who wants your watch to look elegant and unobtrusive, this black watch winder is perfect for you. This will help improve the look of your expensive watch without being overly ostentatious.

MOZSLY watch winders use high-quality upgraded Japanese Mabuchi motors, a well-known brand that manufactures precision motors. These motors keep the noise below 10 decibels, so even if you put it in your bedroom, it will give you a very quiet experience. The internal motor is closed and can be separated from the watch so that the watch will not be magnetized and affect the travel time. With a 36-month warranty and friendly customer service, we welcome you to purchase our watch winders.

In Conclusion

Storing a mechanical watch in a watch winder to wind it keeps the watch's mechanical gears lubricated, extending the life of the watch and keeping it working properly.

Prev Post
Next Post

Leave a comment

Please note, comments need to be approved before they are published.

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Recently Viewed

Close
Edit Option
Close
Back In Stock Notification
this is just a warning
Login Close
Close
Shopping Cart
0 items