Skip to content

Watch Winder TPD Parameters

How to Wind an Altanus Watch?

by SheldonLong 30 Nov 2022 0 Comments

How to Wind an Altanus Watch?

 

About Altanus 
Altanus watch winder steps
Recommended watch winders
In Conclusion

About Altanus 

The origins of  Altanus Geneve date back to the beginning of the last century in Geneva, Switzerland,It was born as a workshop specializing in refined and exclusive products, but in short time, thanks to the initiative of a Neapolitan family headed by Mario Casillo, it entered the panorama of watchmaking, earning more and more approval and expanding its network of customers.

Today, Altanus’ worldwide distribution starts from the headquarters in Il Tarì of Marcianise (Caserta), Italy, still maintaining the Geneva’s  workshops in Switzerland.

Why Manual Winding for Altanus Watches?

the Altanus watch. The most common reason is that you can accurately adjust it to time. This saves you from having to reset your watch as often. It also means that the watch will always be accurate and reliable.

Altanus Watch Manual Winding Steps

- Locate the crown which is usually on the right side of the dial.
- Gently pull the crown away from the dial to its original position, being careful not to pull it too far.
- Begin winding crown clockwise until resistance is felt, or 40 revolutions at a time.
- Push the crown back into its normal position.
- Pull crown out again and turn crown to set hands until hands show current time and date.
- Push it back again when done.

For manual winding, the process is simple and you will find that winding your Altanus gives you a few minutes of peace every day!

Altanus Watch Winder Settings

Most Altanus watch automatic movements can be wound properly with most watch winding boxes . Usually the self-winding movement of Altanus needs to rotate 650-950 revolutions per day, and most of them can be wound clockwise .

MODEL, DESCRIPTION MOVEMENT / CALIBER WINDING DIRECTION TURNS PER DAY (TPD)
Convertible Single Face Automatic: 7845 ALT 2671 Both 650
Elite: 7874, 7874R, 7876, 7876R ALT 2824-2 Both 650
Elite: 7857R, 7875 ALT 7753 CW 800
Elite: 7877, 7877R ALT 9035 Both 650
Master 40 Automatic Steel: 7848, 7848B ALT 2824-2 Both 650
Master Complication    CW 800
Master Complication Steel: 7839, 7839B ALT 7751 CW 800
Master Ellisse Chronograph: 7801 ALT 2045 Both 650
Master Ellisse Solo Tempo: 7803 ALT 2824-2 Both 650
Master Oro Automatic Chronograph: 7769G ALT 7750 CW 800
Master Oro Complication ALT 7751 CW 800
Master Oro Gran Data Automatic LE: 7768G ALT 2824-2 Both 650
Master Oroacciaio Automatic Chronograph: 7769SG ALT 7750 CW 800
Master Oroacciaio Gran Data Automatic: 7768SG ALT 2834-2 Both 650
Master Master Automatic: 7791 ALT 2824-2 Both 650
Master Master Automatic Chronograph: 7769, 7792 ALT 7750 CW 800
Master Master Automatic Chronograph Steel: 7769B, 7792B ALT 7750 CW 800
Master Master Automatic Steel: 7791B ALT 2824-2 Both 650
Master Master Gran Data: 7768 ALT 2834-2 Both 650
Master Master Gran Data Steel: 7768B ALT 2834-2 Both 650
Master Master Woman Automatic Diamond: 16088D ALT 2671 Both 650
Master Master Woman Automatic Steel: 16088, 16088B ALT 2671 Both 650
Master Sport: 7880, 7880B, 7880N, 7880NB ALT 7750 CW 800
Master T Automatic Chronograph: 7792, 7792B ALT 7750 CW 800
Master T Automatic Steel: 7791, 7791B ALT 2824 Both 650
Racing Team:18000 ALT 2824-2 Both 650
Slim: 7902, 7902R, 7904, 7904R ALT Claro 888 Both 500-950
Sub: 7885, 7885B, 7885NB ALT 2824 Both 650

If you can't find your watch model (or movement) in this list, you can identify your Altanus. Try winding mode. You should choose combined winding method (CW+CCW) and minimum turns per day (TPD). Then put your watch into the watch winder and check the accuracy of your watch display time after a few days. If you run behind, you need to increase the number of TPD by one level.

Altanus Watch Time Adjustment Method

Winding a watch is a complex endeavor, but for many watch lovers, it is one of the joys of interacting with a watch.
- Pull the crown outwards with one push
- Set the watch to the exact local time.
- Push in crown and turn clockwise until secure.
- Push crown firmly into position 1 and watch starts to move.
Some Altanus watches have a screw-down crown that must be unscrewed to change the time or date. After use, the crown must be pressed against the case and tightened. Otherwise it will affect the waterproof performance of the watch.

Can I Manually Wind my Automatic Watch With the cCrown?

It’s okay to do this once in a while, but not too often—especially if your watch has a screw-down crown.
Firstly, with crown winding, the gears and other parts of an automatic movement will wear out faster, as will the screw-in crown system, as it is not designed for frequent use. Self-winding watches should be worn for at least eight hours a day to make the most of their power reserves, so rather than letting your automatic watch's power reserve drain, invest in a simple automatic watch winder.

What Watch Winder is Wuitable for the Altanus ?

There is no doubt that a high-end watch needs a fancy watch winder. Here are 2 of the highly rated watch winders that we recommend.

MOZSLY® Double Watch Winder -Orange Leather  

double watch winder box-blog

  • Material: wooden box/PU leather/acrylic board
  • Color: Orange/Black/Brown/Carbon Fiber
  • Size: 8.8*5.9*4.7 inches
  • 4 modes with TPD settings ranging from 650 to 1500
  • All three winding directions are supported
  • Antimagnetization
  • Use Japanese upgraded Mabuchi Motor
  • Dual power
  • 3 Years Warranty
  • This watch features a unique orange winding with a multi-layer paint process for a more beautiful, shiny, and smooth finish. Inside, the leather and wood grain look sleek and luxurious. looks great.

MOZSLY® Single Watch Winder - Black Leather

single black watch winder box

  • Material: wooden box/PU leather/acrylic board
  • Colour: Black
  • Dimensions: 4.4 x 6 x 4.4 inches
  • 4 modes with TPD settings ranging from 650 to 1500
  • All three winding directions are supported
  • Antimagnetization
  • Use Japanese upgraded Mabuchi Motor
  • Dual power
  • 3 years warranty

    This watch winder is as simple and understated as Altanus other classic black watches. If you're a watch collector who wants your watch to look elegant and unobtrusive, this black watch winder is perfect for you. This will help improve the look of your expensive watch without being overly ostentatious.

    MOZSLY watch winders use high-quality upgraded Japanese Mabuchi motors, a well-known brand that manufactures precision motors. These motors keep the noise below 10 decibels, so even if you put it in your bedroom, it will give you a very quiet experience. The internal motor is closed and can be separated from the watch so that the watch will not be magnetized and affect the travel time. With a 36-month warranty and friendly customer service, we welcome you to purchase our watch winders.

    In Conclusion

    Storing a mechanical watch in a watch winder to wind it keeps the watch's mechanical gears lubricated, extending the life of the watch and keeping it working properly.

     

    Prev Post
    Next Post

    Leave a comment

    Please note, comments need to be approved before they are published.

    Thanks for subscribing!

    This email has been registered!

    Shop the look

    Choose Options

    Recently Viewed

    Close
    Edit Option
    Close
    Back In Stock Notification
    this is just a warning
    Login Close
    Close
    Shopping Cart
    0 items